Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

NO RECEIVE ON 6500

SITTERLEY
SITTERLEY Member ✭
edited June 2020 in FLEX-6000 Signature Series
The receive on my 6500 is nearly nonexistent when I boot it ir change bands. To get it back I have to switch the ant from ANT 1 to XVTR then back to ANT 1 then it is fine till I change bands again or re boot. However the transmitter always has output.

Answers

  • WX7Y
    WX7Y Member ✭✭✭✭
    edited June 2020
    have you tried a Hard reset?
    1st Export your profiles to some where like your desktop. 
    2nd Do a HARD Reset (look in the 6500 Manual)
    3rd After the hard Reset then check to see if it works correctly, boot up frequency should be like 14.100 if I remember right if the hard reset worked. 
     4th Import your saved Profile, MAKE SURE you have the "Preferences"  checked OFF, then import the Profile.

    See if it still works If not you may want to do a support ticket. 

    73's
    Bret
    WX7Y


  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    First step for diagnosis... Export your profiles, then do a factory persistence reset. (Hold the OK button while powering the rig on) Then see if anything has changed. Ken - NM9P
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited April 2019
    Bret typed faster.......
  • SITTERLEY
    SITTERLEY Member ✭
    edited April 2019
    Reset didn't change anything
    Bob K7POF
  • WX7Y
    WX7Y Member ✭✭✭✭
    edited April 2019
    Do a help desk ticket maybe Flex can help you out

  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited April 2019
    Yep, that is the next step.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories