Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

6700 with Kuhne up converter

Member ✭✭
edited March 2019 in FLEX-6000 Signature Series
I am building a station to allow me to access Es'Hail-2 (QO-100) the new geostationary satellite recently commissioned.  I am fortunate in that the footprint is great for me at either my UK or my Zimbabwean locations.

I am considering buying the MKU UP 2424 A, Oscar Phase 4 Up-Converter from Kuhne.

The specifications say that the 144Mhz input power should be 0.5w to 5w (adjustable).  
My question is will my Flex 6700 give me enough output on 2m to drive this or will I need an intervening power amplifier?

Advice would be greatly welcomed.

David G4NRT/Z21NRT

Answers

  • Member ✭✭
    edited March 2019
    Flex-6700 transverter port output specs state 0 dbm typical, +15db dbm max, (0.001 to 0.0316 watts).
  • Member ✭✭
    edited March 2019
    Thanks. That's what I guessed but I needed to be sure. I'll have to use my Icom rig instead but it will mean calculating the frequencies rather then programming them in!

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories