Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Com ports again

Michael Coslo
Michael Coslo Member ✭✭
edited April 2020 in SmartSDR for Windows
I have one computer that I no longer use SSDR on. My club bought an Icom 7610, and their lame driver installer claims I already installed the driver (I did, but the com ports I'm supposed to see do not show up) and said lame driver allows no uninstall.  But in trying to troubleshoot the issue, the Flex com ports keep showing up every time I reboot. So I would really like to get them off the computer. SSDR is no longer there, but unfortunately the uninstall of SSDR was done without using Revo. And uninstalling the drivers only gets rid of them until the next boot.

Anyone else have an issue with persistent drivers reinstalling??

Answers

  • David Salomon
    David Salomon Member ✭✭
    edited April 2020
    Reinstall SmartSDR CAT (or all of SmartSDR if you cannot install just CAT). When the CAT window is open, delete the ports. Then RIGHT-CLICK the Remove button and click the Reset button that appears. Your ports should now be gone, and should stay gone.
  • Paul M
    Paul M Member ✭✭
    edited September 2018
    There is a Silicon Laboratories Driver removal in my add remove programs of windows for the Icom.  I had no issues with the Icom driver installation. 
    Paul -W4PGM
  • Michael Coslo
    Michael Coslo Member ✭✭
    edited September 2018
    That's what I was figuring I'd do.  A pity this wonderful radio is fit with such a brittle Operating system.  I bought a Windows computer to use SSDR (dogpark wasn't out yet) And if I had to stake my life on it working, I'd boot to DogPark. 


  • John - K3MA
    John - K3MA Member ✭✭
    edited September 2018
    Maybe this tool would be of use.  https://helpdesk.flexradio.com/hc/en-us/articles/115000504463-Removing-In-Use-Com-Ports-for-Availabl...
  • Dudley WA5QPZ
    Dudley WA5QPZ Member ✭✭✭
    edited March 2020
    Michael,

    Did you follow the removal procedure on the HelpDesk site? 

    https://helpdesk.flexradio.com/hc/en-us/articles/204975589-How-to-do-a-Complete-uninstall-of-SmartSD...

    You will have to remove FlexVSP   and then reboot to remove it ..  You may have to go to Device Manager of Windows and remove any ghosted ports as these will prevent you from assigning those ports for anything else.. 

    https://helpdesk.flexradio.com/hc/en-us/articles/200883925-Removing-Hidden-or-Ghosted-Com-ports

    This should clear your system of previous ports..  

    You have to be aware of what you are downloading to your system,  there are lots of sites that will mislead you ,    Google, Bing, Yahoo , ....    These are the things that will confuse and  consume your computer.

    73,
    Dudley
    Wa5QPZ
  • Michael Coslo
    Michael Coslo Member ✭✭
    edited September 2018
    Hi Dudley - I'll be checking on it this afternoon. I'm pretty certain that FlexVSP has been Revo'ed, but perhaps not.
    Note that there are no hidden or ghosted ports, but that the Flex com ports keep showing up even after deletion. After rebooting, there they are again. So it could hopefully be pilot error.  Now is this the problem keeping the Icom virtual com ports from showing up, but not allowing me to delete them? I dunno, but since that computer won't be used to run SSDR any more, I want them gone. 

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories