Brand new to 6400m problems finding transmitter settings

Pepper · July 2018

New to Flex 6400m. Attempting to reach transmitter settings by pushing power knob. Transmit menu will not appear when I push and hold it or fast push of knob. Have tried on slice A and B. Does transmit without problems. What am I doing wrong ? Also it came with an older software. Should I upgrade at this point ?

Mike KE4U · July 2018

Hi Pepper - There are several transmitter settings areas you can access.

1. Holding down the MIC / SPEED knob or touching the RF PWR information center-screen will bring up a menu.

2. The Transmit tab can be selected by touching the MENU center-screen.

3. Touching the slice reciever on-screen will let you set transmitted modes and bands.

4. The Phone/CW tab can be selected by touching the MENU center-screen.

Hope this is useful - I may have missed some other settings but these are ones that come to mind at the moment.

73 - Mike, KE4U

Wayne · July 2018

I get there by touching the power number on the touch screen it opens the same window then to close it just touch the black area beside it. This way yout mic gain is not changed as it does often when getting to the menu by pressing the power knob.

Brand new to 6400m problems finding transmitter settings

Answers

Leave a Comment

Welcome!

Quick Links

Categories