Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Problem with VFO A freq indicator on the screen, very jittery

Rob Monsipapa
Rob Monsipapa Member ✭✭
edited December 2019 in FLEX-6000 Signature Series
I just got the Flex 6600M and I'm running it without any PC involved.  
Firmware 2.1.33
Astron RS-35A power supply

The onscreen frequency indicator is extremely jittery and I'm having to spin the VFO knob pretty hard to get it to move.  I don't have the same issue on slice B.  It's very fluid, no issues but on VFO A it's very jittery.  

I've rebooted the radio several times hoping it would clean up but no such luck.  Link to YouTube video posted below.  I'm also having an intermittent issue with the touch screen.  Sometimes it works and some times it does not!

http://www.youtube.com/watch?v=MMk4jxdQMpk

Any help would be great guys!

Rob - AK7RM

Comments

  • Jim K4JAF
    Jim K4JAF Member ✭✭
    edited December 2019
    You might loosen the VFO A knob a bit and see what happens, maybe it is binding.  If that is not the problem, start a Help Ticket.  Touch screen operation looks fine to me..  
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited May 2018
    I have converted this topic to a support HelpDesk ticket (http://helpdesk.flexradio.com) for expedited issue resolution.  Please respond using the HelpDesk ticket for issue resolution.  We'll be in touch tomorrow morning.

    If anyone else is experiencing an issue similar to this one, please submit a HelpDesk support ticket for issue resolution.

  • Rob Monsipapa
    Rob Monsipapa Member ✭✭
    edited December 2019
    Here is a quick clip on the intermittent touch screen issue:
    https://youtu.be/KRpVDVlgxvE

  • Rob Monsipapa
    Rob Monsipapa Member ✭✭
    edited May 2018
    Don't think it's the knob, it's more fluid than the VFO B knob and that's functioning just fine.

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited May 2018
    Could be the encoder, that is what we'll check out in your HelpDesk ticket tomorrow.
  • Robert Lonn
    Robert Lonn Member ✭✭
    edited May 2018
    You. An tighten the knobs rotation?? How??
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited May 2018
    There isn't a tension adjustment on the tuning knobs.
  • Rob Monsipapa
    Rob Monsipapa Member ✭✭
    edited May 2018
    There could be more going on Tim. I’ll need to record this. I set the F1 button to WNB and when I went to enable it, it shut the radio down... i’ll Record it tomorrow.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited May 2018
    OK.  Please send it via the HelpDesk ticket you have open now so that we are assured to get ti.
  • Rob Monsipapa
    Rob Monsipapa Member ✭✭
    edited May 2018
    Tim, I sent you an email about the programable F1 key shutting down the radio.  Do you want me to post it here also or was the email OK?
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited May 2018
    I am closing this because it is being addressed via the HelpDesk support process.  Looks to be a hardware issue.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories