Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Any updates coming anytime soon?

I heard there was possibly a new update coming soon! Anyone else hear this? If so what improvements are there? 

Completed · Last Updated

Answers

  • Robert LonnRobert Lonn Member ✭✭
    edited June 2018
    Well!!!! Let’s hope it will finally start the coffee **** and toast the bagels in the morning!!!
  • edited April 2018
    I'd be happy if the ANF worked as good as it does in my 7300. James
  • Thomas NE7XThomas NE7X Member ✭✭
    edited April 2018
    I agree, the 6400M ANF is a bit disappointing compared to my ICOM IC-7700.
  • PatrickPatrick WH6HI Member ✭✭✭
    edited June 2
    I wonder if they could apply the TNF filter using a detection algorithm that would work only in the passband being used. It would detect the inband tone(s) and apply the filter and adjust those filters in depth and width to deal with those in band interfering signals. Pat
  • K5ROXK5ROX Member
    edited June 11
    yea my ft-920 has a great ANF and a squelch that isn't disabled for SSB.
  • David Decoons, wo2xDavid Decoons, wo2x Member ✭✭✭
    edited April 2018
    The TNF on SmartSDR works great once you start using it. It is not automatic but you can have multiple notches avtive at once. I agree the ANF needs work. Dave wo2x
  • Takeshi YamadaTakeshi Yamada Retired Member ✭✭
    edited May 2018
    I hope we could hear any news before Hamvention starts, May 18th.

    Ken Yamada
    7e de JI1BNU

  • Tim - W4TMETim - W4TME Administrator, FlexRadio Employee admin
    edited May 2018
    We are still working **** SmartSDR v2.2.  The latest alpha was sent to our team last night for testing over the weekend.
  • Steven WA8YSteven WA8Y Member ✭✭
    edited May 2018
    Yes
  • edited May 2018
    Yep, sounds like they're waiting for Hamvention to reveal their secrets... hahahahahaha
  • Steven WA8YSteven WA8Y Member ✭✭
    edited July 2018

    Being a new Flex owner I am still learning, more than most, I'm sure.  I was surprised to learn that mic settings; DX and DX+ are using CESSB (Controlled Envelope SSB) and thus giving my signal a 2.5dB boost, without Splatter!  Pretty cool!   And I'm glad to know the new software will be v2.2 and not v3 which may cost me.

  • Gary L. RobinsonGary L. Robinson Member ✭✭
    edited May 2018
    I hope if it starts the coffee that it supports K-Cups :-)
  • Bob - W7KWS -Bob - W7KWS - Member ✭✭
    edited May 2018
    I'll be happy if it will simply call home reliably (On going SmartLink fragmented packet issue).
  • Bill RobertsBill Roberts Member ✭✭
    edited May 2018
    I think you'll find that Flex is most generous and non-abusive with the licensing thing.  What other company goes into a death march to fix problems introduced by Microsoft?  We get more than we pay for, believe me!
  • Bob - W7KWS -Bob - W7KWS - Member ✭✭
    edited May 2018
    I have a dozen other software packages on my PC, including audio drivers for Icom, Kenwood, RemoteRig, Bria VOIP, & many others. Why is it that Flex DAX is the only one that a Windows update breaks?
  • Robert LonnRobert Lonn Member ✭✭
    edited June 11
    HDSDR software to drive my ICOM IC-R8600 also BROKE with the Windows 10 update,, My HRD software went into Auto Fix mode and re-loaded the Audio Codex when I booted up the software, then it was back to working OK..  I am seeing a lot of folks with issues across many different forums and software.. My Satellite Software for my ICom IC-9100 needed to be un-installed and re-installed to get it to start working again...  This Windows 10 is by far the worse upgrade I have seen in quite a while...

    Robert
  • Bob - W7KWS -Bob - W7KWS - Member ✭✭
    edited May 2018
    HDSDR used here with a Persius & an SDRIQ has only been troubled only once by a Windows update. Otherwise it hasn't missed a beat through updates from WIN7 through WIN10 build 1803. The one exception was the update to build 1703 & the problem was minor. If I switched from the local monitor to Remote Desktop or back, the waterfall would go nuts forcing me to restart HDSDR, but it still worked fine after the restart. Build 1709 resolved that one exception. Other than that, DAX is still the only thing on several machines that I fear when a Windows update is pending. To me, the problem seems to be one that has been successfully dealt with by most other software authors.
  • David Decoons, wo2xDavid Decoons, wo2x Member ✭✭✭
    edited May 2018
    quite a few users of Virtual Audio Cable had problems as well.

    My Dell XPS 15 laptop had the sound enumeration trashed where it would not detect when I plugged in a headset, thus would not detect the external mic. I rolled back.

    Dave wo2x

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.