Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

For FT-8 TX Settings

W9ILY
W9ILY Member ✭✭
edited June 2020 in SmartSDR for Windows
I have the 6500 and would like to know if there are preferred TX equalizer settings for FT-8? Should it even be turned on?

Answers

  • Jim Gilliam
    Jim Gilliam Member ✭✭
    edited June 2020

    That's a good question. I have wondered if the TX equalizer is bypassed when using the DAX.


  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited April 2018
    Dax in and of itself -- NO.  But when using DigU/DigL the EQ and Processor are turned off.  but watch the audio input levels.  Digital sigs don't like overdrive...
  • WK2Y
    WK2Y Member ✭✭
    edited June 2020
    No equalizer. Flat across.  No compression either.  I know you can still highlight the buttons and it seems to me that the equalizer is not by passed using DAX, but I can not confirm.  
    73,
    Bob, WK2Y
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited April 2018
    All DSP audio processing is bypassed, including the EQ.
  • WK2Y
    WK2Y Member ✭✭
    edited April 2018
    Great to know. Thanks Tim.
    Hope your recovery is continuing smoothly.
  • W9ILY
    W9ILY Member ✭✭
    edited April 2018
    So is it better to run FT-8 in DIGIU or USB with no compression or does it make any difference?
  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator
    edited April 2018
    DIGI-U Dave wo2x
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited April 2018
    Always use DigU. Then you can have a Mic Profile for the digi modes that doesn’t conflict with your SSB Mic Profile. And you won’t accidentally leave EQ set or PROC on. Why do anything else?
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited April 2018
    Always use DIGx for digital modes.  For FT-8, use DIGU
  • W9ILY
    W9ILY Member ✭✭
    edited April 2018
    Thanks for all the responses. It sure clears up things.
  • Dave - WB5NHL
    Dave - WB5NHL Member ✭✭
    edited April 2018
    Also watch your TX power setting.  FT-8 is a 50% duty cycle. The FLEX PA temperature can build up pretty quickly.  Use K9DUR SDRMonitor utility or FRStack to watch the temps.
  • Russ K5OA
    Russ K5OA Member ✭✭
    edited August 2018
    TX filter got me last night. OPEN up Wide if going over 3khz

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories