Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

New rigs now shipping in Canada

Ken - VE5KC
Ken - VE5KC Member ✭✭
edited December 2019 in FLEX-6000 Signature Series
I just received my invoice & shipping notice from Radio World (Toronto).

I have my serial number and the 6400 is on it's way. Only a few more days waiting..  Should here Monday or Tuesday.  

73 to all. . .

de Ken - VE5KC

Comments

  • Andrew O'Brien
    Andrew O'Brien Member ✭✭✭
    edited March 2018
    I'm only 90 mins away from there.  Maybe I can swing by and convince them I am VE5KC. 
  • Ken - VE5KC
    Ken - VE5KC Member ✭✭
    edited March 2018
    Hi Andrew..

    Too late it's already picked up and in the Post Office shipping system, just got the email from Canada Post. hi..

    Radio world had none available for sale, at this time..  All their first shipment of 6400/6600 radios was pre-sold months ago, similar to direct from Flex.

  • Doug
    Doug Member ✭✭
    edited December 2019
    What is the last 4 digits  ser# of your radio and is it a M model
  • Ken - VE5KC
    Ken - VE5KC Member ✭✭
    edited March 2018
    3606
  • Doug
    Doug Member ✭✭
    edited December 2019
    Thanks Ken, again is it a straight 6400 or the M model. I just received my shipping notice today 3/1/18 and I have a 6400M and the last four digits of mine are 0343. My best guess is they have shipped more non M model both 6600 and 6400 than the M
  • Marc Lalonde
    Marc Lalonde Member ✭✭
    edited March 2018
    i have 4747 on my very early 6600 , not look sequential 
  • Ken - VE5KC
    Ken - VE5KC Member ✭✭
    edited March 2018
    It's a straight 6400.. 

    I ordered a 6400M but changed my order to the none M model shortly after. I decided that I really didn't want a dedicated computer I can not directly manage ,built into the radio. With many years of experience with computers, in addition to having my computer smart son living in my suite near by, I'm all set to manage my own computers, something not so easy with the dedicated built in tablet.

    When I'm in the ham shack, I'm right next to my i5 computer with a 27in monitor.  I see little benefit in a M model for me.

    Ken - VE5KC
  • Doug
    Doug Member ✭✭
    edited March 2018
    Hum well whatever the M isn't a dedicated computer you can't manage. It gives you everything a non M does plus the ability to use it as a stand alone radio if desired. Each their own I look forward to plugging my radio into my network here plus using it remotely anywhere in the world.
  • VE5DMC
    VE5DMC Member ✭✭
    edited December 2019
    I received my 6400 on Friday (Ottawa). SW installed, updated and radio working in a few minutes!  Once I get my tuner I will be on the air.
  • Ted VE3TRQ
    Ted VE3TRQ Member ✭✭✭
    edited March 2018
    Looks like the M models are not yet shipping to Canada :-( Still waiting for my 6600M from Radioworld.
  • VE5DMC
    VE5DMC Member ✭✭
    edited March 2018
    Radioworld showed a 6400M in stock on Friday - could have been an error.
  • Ted VE3TRQ
    Ted VE3TRQ Member ✭✭✭
    edited March 2018
    Over a week ago, Radioworld showed a 6600M in stock. I asked them about it and was told their inventory system required them to move their display radio into stock before making it unavailable again - I just happened to query the web page while it was listed as "In stock" :-( Sure enough, next time I checked, the 6600M showed as "Unavailable" instead of "In stock".

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories