Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Wide Noise Blanker Demo.

Member ✭✭
edited June 2018 in SmartSDR for Windows
As part of the testing of my 6600 in a true urban environment, I got to test out the Wide Noise Blanker.

This was on 80.  The antenna is a Windom about 30ft off the ground.  Nothing special and just a typical subdivision installation.

https://youtu.be/qicQazVNJRs

73, Mike va3mw

Welcome!

It looks like you're new here. Sign in or register to get started.

Comments

  • Member ✭✭
    edited January 2018
    Nice demo. I think many people may not be aware that it takes a few seconds to react. That time may also be why it’s often not effective on noisethat is more interriment. If the noise could be analyzed and saved, rather than real time correction, it might be even better for other types of noise, .
  • Member ✭✭
    edited January 2018
    Excellent demo and it mirrors what I see here in my location, a subdivision with only room for my Butternut vertical.  Without WNB, the low bands would be unusable.

  • Member ✭✭
    edited June 2018
    Kudos to the flex designers of the wideband noise blanker it works as you demonstrated. Great very nice.
  • Member ✭✭
    edited January 2018
    Almost quit the hobby on the HF Bands until I got Flex and used WNB (from a borrowed Flex6300 ) to take out nasty Noise from neighbor ! Then got the Flex, no turning back !
    73 Mike

Leave a Comment