Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

V2.0.19 connection fails and automatic retries fail

WA6FXT MikeWA6FXT Mike Member
edited January 2018 in FLEX-6000 Signature Series
From time to time, when I try to connect to my 6700 (v2.0.19) from SSDR, Maestro or iOS the initial display (SSDR screen is displayed, then while waiting for the Slice and panafall to come up, the connection is reset and the sequence repeats. To clear this situation, I have to cycle the radio (shutdown / startup). Has anyone else seen this?

Open for Comments · Last Updated

Comments

  • Jim GilliamJim Gilliam Member
    edited December 2017

    I have had numerous instances of bringing up my radio on IOS and the screen comes up but I never get any audio or a spectrum display. After resetting the radio, no more problems until it happens again and I can't put my finger on why.


    Jim, K6QE

  • WA6FXT MikeWA6FXT Mike Member
    edited December 2017
    That’s what I also see, on iOS.
  • WA6FXT MikeWA6FXT Mike Member
    edited December 2017
    A link to what I see on the Maestro.
  • WA6FXT MikeWA6FXT Mike Member
    edited January 2018
    I guess only two of us are seeing this problem... Mike
  • Tim - W4TMETim - W4TME Administrator, FlexRadio Employee admin
    edited January 2018
    I have converted this topic to a support HelpDesk ticket (http://helpdesk.flexradio.com) for expedited issue resolution.  Please respond using the HelpDesk ticket for issue resolution.

    If anyone else is experiencing an issue similar to this one, please submit a HelpDesk support ticket for issue resolution.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.