Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

new TURF file for 630m in USA?

W5XZ - dan
W5XZ - dan Member ✭✭
edited June 2020 in FLEX-6000 Signature Series
is FRS gonna unlock my rig to TX on 630m when i get legal in 30 days?

"inquiring minds need to know"

74, w5xz, dan

Answers

  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    The power amp will not cover the new bands. There are no bandpass filters installed for that low a frequency. But you can build or by an appropriate amp for the frequencies and drive it with the Transverter port on your rig. No TURF file needed.
  • W5XZ - dan
    W5XZ - dan Member ✭✭
    edited June 2019
    i know there is no LPF, but that can be MY responsibility...the broadband transformers in the final may not be very efficient at the lower freq's, though...but, i bet there's more rf there than the transverter port, ken

  • KF4HR
    KF4HR Member ✭✭
    edited September 2017
    When will the new bands become available? 
  • Steve-N5AC
    Steve-N5AC Community Manager admin
    edited September 2017
    In order to use any band without the power amplifier, you need to use the XVTR output port on the radio.  If you set the radio to transmit on the XVTR port, you will find that it will transmit anywhere.  No TURF needed.
  • Michael Baker
    Michael Baker Member ✭✭
    edited June 2020
    So Steve, how much power can you get out of the transverter port?

    Mike K7DD
  • k3Tim
    k3Tim Member ✭✭✭
    edited September 2017
    https://community.flexradio.com/flexradio/topics/flex-6000-series-radio-on-630-meters
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited September 2017
    At full output on 10 Meters, mine is about +15 dBm or about 30 milliWatts.
    Believe it or not, I have had contacts with locals a couple miles away at that power level when connected to my regular antennas.  S9 to a station about a mile away!

    I saw another post from Steve that said it may be a bit lower ... about +10 or 11 at 630 Meters.  That is still a little over 10 milliWatts output.  Certainly usable for driving a high gain amp.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories