Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Frequency on CW Skimmer does not match radio - I'm new to Flex radio

W2FMQ Fred
W2FMQ Fred Member
edited June 2020 in FLEX-6000 Signature Series
 The frequency on CW Skimmer does not match radio. 48 hrs ago I received my first Flex radio. A Flex-6500. So to say I am new to Flex is an understatement. My problem is that the CW Skimmer  frequency does not match my radio. dxatlas.com says that I need to check my CAT settings for this.Maybe I am just burned out from trying to get everything up and running right away but could use a little help

Answers

  • Bob G W1GLV
    Bob G W1GLV Member ✭✭
    edited June 2020
    Fred , you need an app from QRV.com named SDR-Bridge. Download it and install. This app will make CW Skimmer work very well with SSDR. NN4Z wrote a nice setup PDF just for this, look him up the website. Good Luck
  • W2FMQ Fred
    W2FMQ Fred Member
    edited June 2017
    Thank you for the reply Bob. I already have SDR-Bridge installed. Everything on the skimmer is working except the frequency on the skimmer is on 117.65 and does not follow the radio and  if I click a call it takes my radio to frequency 117.65, So it is communicating with the radio but I do not know what CAT setting " according to dxatlas " I have to change to make the skimmer read the same frequency.
  • Mark_WS7M
    Mark_WS7M Member ✭✭✭
    edited June 2017
    Hi Fred,

    SDR Bridge takes care of what is needed via CAT at least in my setup.  There is a problem with rounding of frequency between the Flex and CW Skimmer.

    While CW Skimmer is an amazing app I OFTEN have issues with the pan and sync to CW Skimmer.  In order to get my "frequency" point in Skimmer to be on screen I have to have that slice pretty close to the far left of my pan.  If I move the slice to the middle my frequency point disappears off the skimmer screen.

    This is possibly due to Skimmer working on a larger frequency range than I can display.  Regardless of the cause it makes for a love/hate relationship of skimmer.   It is sad that it is pretty much abandoned.  There is talk the author is working on something new so we have hope it will be better but like most Ham Projects these things take time.

    I'm sure my post was less than helpful but more an acknowledgement of the issues.

    Mark
  • K1UO Larry
    K1UO Larry Member ✭✭✭
    edited December 2017
    Hi Fred,  You do not need any CAT settings with SDR-Bridge but you do need to set up the IQ channel and enable it . As Bob said.  NN4ZZ has a nice tutorial ,just upddated recently, that will cure your Skimmer setup problems at least!
    http://www.nn4zz.com/Data/NN4ZZ%20CwSkimmer%20Bridge%20setup%207-Jun-2017.pdf

    Good Luck
    Larry  K1Uo

  • W2FMQ Fred
    W2FMQ Fred Member
    edited June 2017
    Thanks for all replies and help guys. I did not have the DAXIQ turned on. Works like it's suppose to now. Thanks again for all the help

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories