Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

error codes on 6700

kk4x
kk4x Member
edited March 2017 in FLEX-6000 Signature Series

Has any one experience the following error codes on there FLEX 6700:

PSL 3V3 295 AND PSH 5V3 574. Any input appreciated,

also while doing a Hard Reset, my 6700 Times Out.

I put in a help ticket already with more issues too.

thanks for any input.


Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Anytime you experience a hardware issue and receive these types of error codes, you should open a HelpDesk support ticket.

    The radio has multiple voltage rails each regulated by a dedicated voltage regulator.  The errors above indicate that the 3.3V rail is in an under-voltage condition and the 5.3V rail is in an over-voltage condition.  

    Why this is happening needs to be investigated, hence the request to open a HelpDesk ticket.  Thanks for doing so.
  • dbraggs
    dbraggs Member, Unconfirmed ✭
    [{"insert":"why are there not any service manuals out for the flex 6000 series? \n"}]
  • John KB4DU
    John KB4DU Member ✭✭✭✭

    Few user serviceable parts. Almost everything is done by software.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories