Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

SO2R audio muted when Dual CQ N1MM or DX Log on 6700

Member ✭✭
edited January 2019 in FLEX-6000 Signature Series
I just got DXlog working in SO2R mode but as I use mode where I can TX on slice A and listen on slice B (on another band) the slice B gets muted more or less. Same happens with N1mm in Dual CQ mode. This is problematic as you wan to do S&P on slice B while sending on slice A. The same happen when changing TX to slice B and listening on slice A. 
I use Maestro and I cannot see if I can alter this anyway...? I listen on audio output (front) of 6700 as I use an external Winkeyer WKUSB for CW generation.
 

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Answers

  • Member ✭✭
    edited January 2019
    This is traditionally controlled from the logger in SO2R mode.

    according to the documentation online for this program..  
    AltGr-S, Ctrl-Alt-S: Listen to both radios in stereo (toggle)

    here is the entire command set online including SO2R
    http://dxlog.net/docs/index.php/Commands


  • Member ✭✭
    edited April 2017
    heres more specifics 
     AltGr-A, Ctrl-Alt-A: Listen to the primary radio with both ears   AltGr-T, Ctrl-Alt-T: Listen to the secondary radio with both ears   AltGr-S, Ctrl-Alt-S: Listen to both radios in stereo (toggle)   AltGr-L, Ctrl-Alt-L: Listen to the "other" radio with both ears during transmit (headphone "latch")   AltGr-R, Ctrl-Alt-R: Restore automatic control (advanced scenarios will control headphones, like $RESET)   AltGr-1...AltGr-8, Ctrl-Alt-1...Ctrl-Alt-8: Select one of the eight SO2R scenarios
  • Member ✭✭
    edited November 2016
    I do not think this alters it. Same strange behavior in N1MM and as far as I know no means here to influence audio in one ear or both... In Morserunner mode of SO2R and DxLog it works as you expect. (I will send you screenshots of my set up tomorrow)
  • Member ✭✭
    edited November 2016
    In N1MM on a US keyboard the ~ key unmutes both slices in SO2R mode.

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories