Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Unexpected Behavior of Smart SDR SWR / Power Meter into New OCF Dipole

Bill Roberts
Bill Roberts Member ✭✭
edited January 2020 in FLEX-6000 Signature Series
Today I installed a Maxcom (fairly generic) OCF dipole for 80-6 meters.  It has the supplier's 4:1 balun.  I have made a choke at the feed point from a 3 inch ferrite doughnut with 12 turns of RG8X coax followed by 5 snap-on split beads of admittedly unknown mix (Amazon).  My MFJ 259C analyzer says 1.2:1 SWR on 40 meters.  The feed point is about 40 feet above the house and not directly over the shack.  My "Flex PC" has a pair of $8.99 amplified speakers that pick up virtually all stray RF.  They are quiet.

Given the above, my back-up rig, an IC 7300 operates normally into the antenna.  At least on 40, my Flex 6300 running SSDR 1.18.4 shows off the scale SWR and little power output.

Any ideas?

Completed · Last Updated

Answers

  • EA4GLI
    EA4GLI Salvador Member ✭✭
    edited January 2018
    Looks like you might be txing out of the wrong ANT port.
  • G4NRT
    G4NRT David N Bondy Member ✭✭
    edited December 2016
    I think we have ALL done that - once at least!

    David G4NRT
  • Martin AA6E
    Martin AA6E Member ✭✭
    edited January 2020
    My 6500 occasionally transmits into an open circuit, it seems.  Somehow the internal antenna switching does not set up properly.  I can fix this by switching antenna ports to #2 and then back to #1, or other fiddling like that.  After it starts working, all is normal.

    It's rare enough that I haven't declared it to be a major problem, but it is a nuisance when it happens.
  • Bill Roberts
    Bill Roberts Member ✭✭
    edited July 2018
    I'll give that a try.  The funny thing is that I do receive.  Signals seem about 20% weaker than on my main antenna (a GAP Voyager vertical dipole for 160-20).  Thanks.  I will report back but first I have to do the lawn.
  • Bill Roberts
    Bill Roberts Member ✭✭
    edited July 2018
    Might as well close this one. It appears my problem was stray RF that didn't bother the back-up radio. Problem resolved with an old Radio Works line isolator.
  • km9r.mike
    km9r.mike Member
    edited August 2016
    Odd that your pc speakers which seem to be both sensitive and accurate to the presence of stray rf did not indicate such. Good to hear you found a solution and did not have to rely on that back up rig.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.