Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

My Maestro's frequency readout displays unusual frequencies

DrJ
DrJ Member ✭✭
edited May 2020 in Maestro
If I turn my "vfo" knob even just slightly fast the frequency readout is wrong and it shows very unusual and almost random frequencies. e.g. 7.190.476 or 7.330.178 even though I set the tuning step to whole or larger steps such as 10, 50, 100, 500, 1khz, steps etc etc. it does t matter what the tuning step is, if I turn the known faster than about 1rpm it goes from normal to unusual/unpredictable integers of frequency. Both A and B knobs. All bands. Wifi and direct Ethernet. Battery and direct DC power. I am running my 6700 with latest sdr of 1.7.3

Answers

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    We need more info.

    1. What frequency are you starting at?
    2.) What intermediate frequencies are you seeing?
    3.) What is the ending frequency displayed after the fast knob spin?

    The display will not show all frequencies displayed in a linear fashion when knob tuning acceleration is active due to rapid rotation.  If the Maestro performed discreet tuning operations for every frequency step between the starting and ending frequency, tuning would be very sluggish.
  • EA4GLI
    EA4GLI Member ✭✭✭
    edited November 2016
    Is Snap to tune on 6700 enabled?
  • DrJ
    DrJ Member ✭✭
    edited May 2020
    I did change it to snap to two and then I changed back.
  • Steve (N9SKM)
    Steve (N9SKM) Member
    edited May 2016
    Oh man you just made my day, So glad there is acceleration on the knobs. My least favorite thing about my kx3 and eagle. Rate buttons are over RATED
  • EA4GLI
    EA4GLI Member ✭✭✭
    edited November 2016
    It is in the Maestro User Guide page 96

    image
  • DrJ
    DrJ Member ✭✭
    edited May 2020
    BINGO! That was it! I must admit I did actually download the operating manual but my cursory search did not help me diagnose this particular problem. Thanks to all who helped. I just can't wait for version 2.0 for WAN. That's the only reason I bought the Marstro.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories