Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

I have an Ameritron al-811 amplifier that I'd like to hook up to my 6300.

Member
edited August 2020 in Peripherals & Station Integration
I have an Ameritron al-811 amplifier that I'd like to hook up to my 6300. If I use a rig buffer like an ARB-704, do I need a special plug and play cable?  Do I need a rig buffer? Etc.  Thanks.

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Answers

  • Administrator, FlexRadio Employee admin
    edited May 2020
    No special cables needed.  The ARB-704 is not required, but a keying buffer is recommended as a best practice to protect the 6000 keying interface from voltage transients that may damage it.
  • Member ✭✭
    edited December 2019
    I have ameritron 811.....I used to use a Heil FS-2 Foot switch.....and it worked good....thats alll you need...however I thought my Flex needs something more advanced ....and I got an Elecraft KPA500.....Now its seems I have a Flex 6300 with 500 watts 

    George

    YV5WZ
  • Member ✭✭✭
    edited May 2017
    If you like the Rube Goldberg (if you remember that, I know how old you are) approach, I used a Radio Shack 5vdc relay and borrowed 5vdc from the accessory connector on the back of the Flex.  I keyed the relay with the TX1 contacts and key my amplifier with the SPST contacts of the relay.
  • Member ✭✭
    edited April 2017
    I use an ARB-704 and it works fine
  • Member
    edited June 2016
    George,
    What kind of cable did you use with the Heil FS-2?  Do I need a microphone cable assembly (like the CC-1Y) or ??
    Thanks.
    -Phil, K7SHL
  • Member ✭✭
    edited December 2016
    I don't Recall at this moment...but I will check tonight and letting you to know
  • Member
    edited April 2016
    Remember to use TX delay when using an amp with a slow relay like an 811.
  • Member ✭✭
    edited May 2020
    Hello, Trying to interface my 6400 to and old Ameritron 811... can you recommend an alternate keying buffer?

  • Member ✭✭✭
    edited May 2020
    You can't use the Ameritron one?

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories