Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

CAT & Profiles issue

Bill W2PKY
Bill W2PKY Member ✭✭
edited March 2017 in SmartSDR CAT
When changing Profiles applications connected to CAT can become disconnected from CAT I have multiple Profiles set up for multiple WSJT instances; when changing Profiles several of the instances become disconnected from CAT. Otherwise great job!

Comments

  • Bill W2PKY
    Bill W2PKY Member ✭✭
    edited March 2017
    Log trace when a disconnect occurs during Profile Switching:

    2016-01-11 21:13:34 COM11 (wsjtx) [rcvd]: IF000249170000005+0000000000090000000;
    2016-01-11 21:13:34 COM11 (wsjtx) [sent]: IF;
    2016-01-11 21:13:34 COM11 (wsjtx) [rcvd]: IF000249170000005+0000000000090000000;
    2016-01-11 21:13:38 COM11 (wsjtx) [sent]: IF;
    2016-01-11 21:13:38 COM11 (wsjtx) [rcvd]: ?;
    2016-01-11 21:13:38 COM11 (wsjtx) [sent]: IF;
    2016-01-11 21:13:38 COM11 (wsjtx) [rcvd]: ?;
    2016-01-11 21:13:38 COM11 (wsjtx) [sent]: IF;
    2016-01-11 21:13:38 COM11 (wsjtx) [rcvd]: ?;
    2016-01-11 21:13:39 COM11 (wsjtx) [sent]: IF;
    2016-01-11 21:13:39 COM11 (wsjtx) [rcvd]: ?;


  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Which profile are you changing?  Global, TX or Mic?
  • Bill W2PKY
    Bill W2PKY Member ✭✭
    edited March 2017
    global Tim
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    Thank you.  Can you export your profiles and send them to me?  my e-mail is [my1stname]@flexradio[dot]com
  • Eric-KE5DTO
    Eric-KE5DTO Administrator, FlexRadio Employee admin
    edited December 2016
    Bill,
    Are the CAT ports defined on Slices that perhaps don't exist on these other profiles?  Check the CAT ports and see which Slice they are assigned (Port Edit Menu).
  • Bill W2PKY
    Bill W2PKY Member ✭✭
    edited December 2016
    No. The port works until the profile is changed
  • Eric-KE5DTO
    Eric-KE5DTO Administrator, FlexRadio Employee admin
    edited December 2016
    What I'm asking is with which Slice are the CAT Ports associated?  Each CAT Port is associated with a Slice, like Slice A, for example.  If you have a CAT Port associated with Slice C and you load a profile that doesn't have a Slice C, this could cause the issue you are describing.  You can find which Slice a CAT Port is associated in the SmartSDR CAT Main Window.
  • Bill W2PKY
    Bill W2PKY Member ✭✭
    edited December 2016
    The new profile has the same ports as the previous. There is a problem with WSJT and changing profiles. Say I have 4 JT sessions running on 160m - 30m and switch to a profile 20m - 10m, one or more of the JT sessions will disconnect from the assigned CAT port. Tim is looking at the problem.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    I am working on this with Eric, so his questions are most applicable in trying to figure out what is happening.
  • Eric-KE5DTO
    Eric-KE5DTO Administrator, FlexRadio Employee admin
    edited December 2016
    How many Slices are present on the 160m - 30m profile?  How many on the 20m - 10m?

    It sounds like you have at least 4 CAT ports defined to talk to the 4 JT sessions and each of those has a Slice with which it is associated (see the letter on the CAT Port definition in the SmartSDR CAT Main Window).
  • Bill W2PKY
    Bill W2PKY Member ✭✭
    edited December 2016
    4 and 4 yes you are correct about the setup
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    A screen shot of the CAT window might be beneficial.
  • Bill W2PKY
    Bill W2PKY Member ✭✭
    edited December 2016
    Away from station, send later
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    Eric dropped you a note about a remote access session.  That should supersede any of my requests. 

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories