Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Flex users net

2»

Answers

  • Member ✭✭
    edited May 2019
    ThunderBoomers to the North of me. Y'all Talk LOUDER! 
    We've moved up 4 to 3.724.
  • Member ✭✭
    edited March 2018
    I can hear some of it but QRN QRM got it 80% of the time
    Think I need little more antenna for 80.... 

  • Member ✭✭✭
    edited February 2018
    I'm not hearing anyone well,,speak up gang!!!
  • Member ✭✭
    edited August 2016
    Dale suggested AGCT 0 and FAST and raise the slice volume and headsets and they are audible in between the strikes. Hint: ride the slice level with the FlexControl.image
  • Member ✭✭
    edited December 2016
    good tip

  • Member ✭✭
    edited February 2017
    Anyone in the Southwest want to try 7.208 this evening?
  • Member ✭✭
    edited June 2017
    What time?
  • Member ✭✭
    edited October 2019
    As soon as I can get my station setup and on the air in Florida; I love to join the net.
    However, I hope the topics are related to Flex operations, setup or issues  etc...

    NO weather report,  towers, antennas or health issues; Those topics are rather  boring and not related to Flex.
  • Member ✭✭
    edited March 2018
    Good try to night I know there were more than talked thanks Jim in tenn and Sam we will keep trying if the noise floor was at 100 we would have been ok. Good start
  • Member ✭✭
    edited December 2016
    Well Enrest, there were only 3 of us on 40m this evening - lots of fun.  It was Jay-NO5J, Mike-WA6FXT and myself Norm-W7CK.  Topics tonight centered areound on Microphones, EQ, recorder, programming etc.....  We did some recording and playback which was fun.  Also talked about antennas and some other Flex related operational stuff.   Nice an informal since there were only 3 of us.  If we get a larger group, I'll have to be better at passing it around so everyone gets their turn.

    80m is a bit of a stretch for my antenna.  It will tune up on 80m but I don't think its very efficient.  I may have been a bit late this evening on 3.720 - 3.724 but when I did arrive, I didn't hear anything.... 

    I think I'm going to try to leave a panadapter and slice on 7.208 all of the time.  Although I'm not around the shack much, at least when I am here I'll be listening.

    Maybe we should try to get on around 02:00 Zulu.   Does that sound about right for folks?




  • Member ✭✭
    edited September 2016
    Nice net Norm! I had fun.
  • Member ✭✭
    edited March 2015
    Thanks Norm ...
    I am looking for a place to have my new car alter with an antenna to run my knob mobile radio.
    Hope to join the conversation soon: The topic you discussed are very relevant for the subject.  
  • Inactive Employee
    edited December 2016

    Just to remind everyone that there is a Flex Users Net on Sundays at 1 PM Central Savings time , on 14.329 MHz, USB, and also on Echolink , node 79336 (or my call WA5QPZ)  and CQ100 , 14.329,  and podcasted on   http://livestream.com/wa5qpz      also   all at once.   

    Usually runs about an hour.  


  • Member ✭✭
    edited August 2016
    Wasn't hard for me, except for the code portion, that wasn't really all that hard either.
    just copied a few minutes of code, I was prepared to have to repeat the testing until I got the General, didn't have to.

  • Member ✭✭
    edited December 2016
    Last night there were a bunch of folks using 7.208.  After I listened in for about an hour it was evident, the group is there most every evening.  So, 7.208 isn't going to work.   Does anyone else have a 40m frequency that appears to be fairly clear in the evening starting between 01:00 or 02:00 Zulu?  Conditions are pretty good on 40m most of the time.  It would be nice to have a frequency where Flex folks can just hang out any time of the day.
  • Member
    edited March 2015

    Is anyone going to be on tonight? 80 or 40 will be fine.

  • Member ✭✭
    edited August 2016
    Locally most of 40m SSB is staked out, and subject to SW broadcasters later in the evening. keeping it in the general section will mean trying to find some space. everything is usually "Owned" by some group. there's at least a 2-3  6000 series owners on 7.195 but we don't own the place, the regulars tolerate us, but will want to drop the subject, and move on to the regular, "politically incorrect" discussions,  if we talk Flex too much. that usually runs off most intruders. I'd definitely join a 40m FlexNet if you find it a home.

    73, Jay - NO5J  
  • Member ✭✭
    edited June 2017

    Now that the cold weather is approaching (slowly), is anyone still playing in the 80M band these days? And is 3.720 the playground?  Looking for Flexers in the Central to NorthEast area to brag chew with!!

    Thanks Kevin

  • Member ✭✭
    edited February 2017
    I'd be interested.  Anywhere on 80M in the evenings works for me.

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories