Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Remote operation setup for BEGINNERS

DrJ
DrJ Member ✭✭
edited May 2020 in SmartSDR for Windows
This community forum is great and has helped me a lot but some of the advice is difficult for me to follow as a novice computer person. Can someone help me or direct me to a step by step guide to help me setup my 6700 running SDR 1.51 under Windows10 for remote operation both LAN now and then WAN.? Some have asked about a "dummies" guide for setup for certain things and I agree. In these things I am learning but still a "dummie"!

Answers

  • Mark_WS7M
    Mark_WS7M Member ✭✭✭
    edited October 2015
    I am a relative newbie myself but might be able to help some.  Before I jump in what modes are you interested in?

    Tell me a little about your LAN setup at your QTH?

    Mark
  • DrJ
    DrJ Member ✭✭
    edited May 2020
    Primarily 95% HF SSB and occasional digital. My 6700 is connected to my PC via direct ethernet cable obviously but I connect to the Internet through wireless Wi-Fi to my Apple router/modem.
  • Dan -- KC4GO
    Dan -- KC4GO Member ✭✭
    edited March 2018
    You will need to have your Flex get an address from your router or assign one in the wired side of your router for a fixed IP address. Then you can take your laptop (Windows or Apple running windows) and connect to your Flex via WiFi. You will need to connect to it with one system at a time. So if your desk top is connected disconnect Radio,Cat,DAX before going remote.

  • DrJ
    DrJ Member ✭✭
    edited May 2020
    From what I understand all Apple routers use dynamic( ?) addresses. Whether they do or not, what are the basic steps to have my 6700 get an address from my Apple Time Machine Router. Or if not how could I actually assign one?
  • KY6LA_Howard
    KY6LA_Howard Member ✭✭✭
    edited January 2017
    http://www.macinstruct.com/node/553

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories