Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Iambic CW Keyer always switching into mode A then band changed

Sergey R5AU
Sergey R5AU Member ✭✭
edited April 2017 in SmartSDR for Windows
Iambic CW Keyer always switching into mode A then band changed. Can't be stored into  profile, SSDR 1.5.0
 image


Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited April 2017
    I have entered this report into our bug tracker for further investigation.  Please report any additional information related to this specific issue in this community topic.
  • Sergey R5AU
    Sergey R5AU Member ✭✭
    edited September 2015
    Unfortunately right now I am in business trip however issue well repeatable. I have done downgrade to the 1.4 and back to the 1.5 with full reset without positive results. BTW at the fist time of upgrade to the 1.5 this is was without visible issues on the end but then I tried transmission , my TX signal was or completely on the other frequency or on the other side band, issue was I think in profiles where after full reset of radio issue disappeared and I setup a new profiles. The one more problem was with TX activation on the slice - I have dedicated profiles for every mode and every band, then I selecting a new band with profile operation completed but no active (selected for TX) slices exist . After a couple of resets issue disappeared but still exist in any time initial one with keyer Iambic mode.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    This issue has been addressed in the 1.6.x release of SmartSDR,
  • Sergey R5AU
    Sergey R5AU Member ✭✭
    edited April 2017
    Thank you Tim !

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories