Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

SWR Plotter software and Flex radios

TomTom Member
I have installed SWR Plotter 6k sofware but it does not connect to my F6700. My radio is connected to the PC dirrectly and apparently it creates problem with connecting to SWR Plotter. Was someone able to make SWR Plotter working in this configuration?

I also installed SWR Plotter to use it with my Flex 3000 but I am not sure which COM port has to be used for connection to PSDR.
Plotter's manual does not explain it.

All  comments/suggestions about this matter will be appreciated.

Tom, SP7WT

Answers

  • DH2IDDH2ID Member ✭✭
    edited March 2017
    SWR Plotter 6k runs here without any problems.
    My Flex-6500 is connected to my DSL router/DHCP server through a switch,
    though. Could you try if this works for you?
  • DK1KQDK1KQ Member
    edited July 2018
    How can download SWR Plotter ?
  • John  - W8AGSJohn - W8AGS Member ✭✭
    edited March 11
    Tom, I have SWR plotter working fine with my PC connected directly to the Flex 6500. Make sure that the antenna tuner is bypassed in your 6700. You might try uninstalling and redownloading SWR plotter. Good luck. John, W8AGS
  • John  - W8AGSJohn - W8AGS Member ✭✭
    edited March 11
    Tom, I should have mentioned that I always start SSDR before starting the Plotter. I don't believe it will work with the Flex 3000. If you find that it does, let us know. I also have a 5000A to use . John, W8AGS
  • N7VRN7VR Member
    edited April 2016
    I use it with my Flex-3000. It just connects via the CAT port. In my case COM1.
  • N7VRN7VR Member
    edited April 2016
    I just realized I am using SWR Plotter 2.0.2 for the Flex-3000, not the SWRPlotter6K . Steve does support PowerSDR utilities on his site listed above in downloads.
  • John  - W8AGSJohn - W8AGS Member ✭✭
    edited March 11
    N7VR Thanks for your reply. I'll have to set it up on my 5000A. John, W8AGS
  • AA0KMAA0KM Member ✭✭
    edited April 2017

    I got one 10 meter plot out of the software.

    Worked pretty well. Very simple to use.

    I lost my 6500 audio so had to restart the radio and smartsdr to get it back.

    Going to email the authors.

    It has great promise.

    Connected the flexradio  to switch and to router not direct.


Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.