Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Flex 6500 in 50 Mhz?

Javi LU5FF
Javi LU5FF Member ✭✭
edited June 2020 in FLEX-6000 Signature Series
Flex 6500 in 50 Mhz? Hi folks I'm trying to change my platform to Flex 7500, my main activity is concentrated in 50 Mhz, which can give me an opinion about it? the receiver is good in 6m with weak signals? greetings and thanks 73s Javi LU5FF

Answers

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    The FLEX-6500 receiver is excellent good on 6m (50 MHz).  I worked EA8DBM (IL18) from FM05 and had no problem hearing him when his signal was 54 with a lot of QRN.
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    Receiver noise figure has never been a limiting factor on six meters at my location. It seems to be pretty sensitive here, and noise always rises when the antenna is switched inline, indicating that it is more than adequate. That may change with a new antenna and noise reduction at my QTH, but I doubt it.
  • George KF2T
    George KF2T Member ✭✭✭
    edited February 2019
    Add another "very satisfied" vote. 50 MHz performance is very good. As with Ken, my limiting noise is external.
  • Bob Brown - N8OB
    Bob Brown - N8OB Member
    edited February 2018
    I have been having a great time on 6M with the 6300
  • Javi LU5FF
    Javi LU5FF Member ✭✭
    edited January 2016
    tnx all, some tests to eliminate line noise? NB is effective in these cases?

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories