Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Why do I have to re-tune the ATU when I change the receive antenna?

Robert -- N5IKD
Robert -- N5IKD Member ✭✭
edited March 2017 in FLEX-6000 Signature Series
Why do I have to re-tune the ATU when I change the receive antenna?

If I tune an either ANT1 or ANT2, then switch the "receive" antenna to the other antenna ANT2 or ANT1, then my SWR reading increases until I re-tune. Is this the correct behavior?

Answers

  • K6OZY
    K6OZY Member ✭✭✭
    edited February 2017
    Persistant ATU memories are a coming feature.    The default behavior is to disable the ATU on antenna switches between ANT1/ANT2.   Mentioned here:  https://community.flexradio.com/flexradio/topics/vswr
  • Robert -- N5IKD
    Robert -- N5IKD Member ✭✭
    edited March 2015
    I am only switching the receive antenna. Isn't the transmit antenna the one that is tuned?
  • K6OZY
    K6OZY Member ✭✭✭
    edited June 2014
    I would think so, but it does it when the RX antenna is changed too.   I just reconfirmed this on my 6700.
  • pa0bie
    pa0bie Member
    edited June 2014
    After the ATU is used , the receiver is also working through  the tuner as I have understand.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Robert, the ATU is working as designed.  The ATU, when enabled is in the RX and TX signals paths.  So changing any antenna in any slice will put the ATU into bypass mode and require a re-tune. Granted on RX this really doesn't make a lot of difference, especially in the same band, but for TX, it makes can make a significant difference.

    Once we add the automatic / memory feature for the ATU, this behavior will be mitigated as if you have previously tuned it, the LC combination for that antenna port/frequency combination will be in a memory and will automatically be selected. 
  • K6OZY
    K6OZY Member ✭✭✭
    edited June 2014
    Tim, is the only choice to be inline for RX & TX?   I would prefer it to be inline for TX only.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    This capability is not under software control. 
  • Andrew VK5CV
    Andrew VK5CV Member ✭✭
    edited February 2017

    Tim,

    With 1.4 I am now using a Pixel loop on RX A.

    When I change the RX antenna to Ant A (or back again) the TX ATU drops out and I need to retune.

    I know that memory tuning is coming but it seems to me that the ATU should follow the TX antenna.

    Andrew VK5CV



Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories