Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Just connected a UT5JCW 28/144 MHz Transverter to my 6500 - works pretty well. How can I get the

Wolf
Wolf Member ✭✭
edited March 2017 in SmartSDR for Windows
Just connected a UT5JCW 28 / 144 MHz Transverter to my 6500 - it works pretty well. How can I get the frequency display showing 144,**** ?

Answers

  • Jack
    Jack Member
    edited April 2015
    Fill out the XVTR page on the XVTR tab in the Radio config and setup window then just select the XVTR section in the Band window and badah-bing you're now seeing the proper frequency in the slice !
  • WA2SQQ
    WA2SQQ Member ✭✭
    edited January 2017
    I'm eager to hear your feedback on this transverter. I'm waiting for mine to be delivered. How large of a heat sink did you use?
  • Wolf
    Wolf Member ✭✭
    edited May 2015
    Jack, Thank you ! That was easy going  . . .  : )

    Re feedback on this transverter:  It was delivered within 10 days. I put it on a 4 x 8 cm heat sink.
    No issue to get it running.
    Anyway - it's a low cost XVTR (116 MHz is 20 dB below Tx signal) -
    Rx is OK; Tx adjusted to 5 W works well too.

    73, Wolf
     

  • Jack
    Jack Member
    edited April 2015
    Super - I have a pair of DEMI XVTRs, a 144 and a 220 and love having an All-band All mode Flex 6300  :)
    Can hardly wait for SSDR ver.1.4 !!
  • Tom - WQ5O
    Tom - WQ5O Member ✭✭
    edited March 2017
    Do you have a link to where it can be bought.  The last link I see was back in 2012 on ebay and it's gone now.

    Thanks.

    Tom
  • Wolf
    Wolf Member ✭✭
    edited May 2015
    I bought it here:   http://transverters-store.com/144mhz.htm

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories