Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Recording a Large B/W for Later Listening

shawje
shawje Member ✭✭
edited May 2020 in SmartSDR for Windows
I also use my 6700 for MW/LW DXing.  Is there any way, or any plans, with SSDR to record .5 to 1MHz in a single pass for a couple of minutes?  I could record most/all of the MW spectrum say from 1859-1901 to get stations' on-the-hour ID, then listen at my leisure for station confirmation across the AM broadcast band.  73 and Thanx!

Answers

  • Rick Hadley - W0FG
    Rick Hadley - W0FG Member ✭✭
    edited January 2018
    Sounds like something I used to do 45 years ago for a certain unnamed government agency.  Yes, the technology to do it existed back then too... ;-)
  • Gerald-K5SDR
    Gerald-K5SDR FlexRadio Employee ✭✭
    edited April 2019
    Jim, its in the backlog somewhere on the wish list but not until after v2.0.  
  • shawje
    shawje Member ✭✭
    edited December 2016
    OK, FB Gerald.  Will look for it down the road.
  • k3Tim
    k3Tim Member ✭✭✭
    edited May 2020
    Gerald - Care to give and estimated ETA for 2.0.  

    :-)

    Takes for your candor and updates!

    Best,
    k3Tim

  • Mike NN9DD
    Mike NN9DD Member ✭✭
    edited October 2019
    Wow Mike N9DFD
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    After SmartSDR v1.5

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories