Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

frequency calibration

Peter Bentley
Peter Bentley Member ✭✭
edited April 2020 in FLEX-6000 Signature Series
My 6700 is 50 Hz off frequency, no big deal, but can this be adjusted or calibrated out using a known accurate souce and if so, how?

Answers

  • Chris DL5NAM
    Chris DL5NAM Member ✭✭✭
    edited April 2020
    How did you measure the 50 Hz?
  • Peter Bentley
    Peter Bentley Member ✭✭
    edited November 2014
    Hello Chris

    By listening to WWV on 15 mHz and measuring the audio off beat or difference from zero beat, using a frequency meter.

  • George KF2T
    George KF2T Member ✭✭✭
    edited February 2019
    There is a calibration utility in the radio settings. Settings / Radio Setup / Receive / Frequency Offset
  • Peter Bentley
    Peter Bentley Member ✭✭
    edited November 2014
    Thanks George, I was looking in the wrong place, have found it O.K. now
  • George O'Brien
    George O'Brien Member
    edited November 2014
    Hello Peter, I think Chris wants to ensure that you are truly off calibration by that much. The clock in the 6700 is specified at 0.02 ppm (stability) while your offset is >3 ppm. That is a rather large difference. I'm not saying this couldn't happen, but you might want to check by another means. I use FLdigi and its frequency analysis mode. During the last ARRL Freq Measurement Test my setup was within 0.04 Hz. ( I do have the GPSDO option.)

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories