Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

RTTY ,split more 10khz with DW780, DAX, flex 6300

on5po
on5po Member ✭✭
edited November 2017 in FLEX-6000 Signature Series
Photo of on5po

on5po

  • 23 Posts
    •  
  •  0 Likes



hello,  who could help me how to open the second chanel of the DAX  
I only have dax chanel 1 open  
to be able to make the split in rtty of more than 10Khz  
I have win7,64 bits, flex 6300, and DM780  
so possible with photos  
thank you for advance   
on5po@hotmail.fr
73  
on5po, Janny

Answers

  • Al K0VM
    Al K0VM Member ✭✭✭
    edited November 2017
    Janny,
      Running rtty split with two DAX channels requires that you use two slices..used DAX 1 on slice A and DAX 2 on slice B.  In your RTTY program, select DAX1 RX for receive ( caputre ) and DAX 2 TX for transmit ( playback).  You should see appropriate  displays in the the DAX control panel. with DAX 1 enabled for RX and DAX 2 enabled for TX.

    AL, K0VM
  • on5po
    on5po Member ✭✭
    edited January 2017
    Thank you Al,  my problem, I only have a chanel the 1  
    I don't know how to make to have the chanel 2  
    the chanel 2 doesn't function in TX
    73
    janny, on5po
  • Al K0VM
    Al K0VM Member ✭✭✭
    edited November 2017
    Janny,
      How many channels show up in the DAX control panel? Can DAX 2 be enabled for TX?  If you go the  windows control panel>manager audio devices, do any DAX 2 channels show up there ??  ( you may have to enable' show disabled devices' ) 
      You may have to uninstall and reinstall DAX.

      In your RTTY program, do other DAX channels show but DAX 2 is missing ?  There is nothing magic about DAX 2 if another one is available.. Some RTTY programs can not display all the DAX channels that are installed.

    AL, K0VM
  • on5po
    on5po Member ✭✭
    edited January 2017
    AL, 
    In the DAX, chanel 1 and chanel 2 I have RX  in dm780 waterfall  in chanel 1 TX... ok   
    chanel 2 TX no... no power ptt of dm780 toward flex.... why?  
    I don't know or go have ptt to the chanel 2  
    veils or is my problemimageimage

    73
    Janny,on5po
  • on5po
    on5po Member ✭✭
    edited January 2017
    Al,
      rectification not of RX and TX with chanel 2  
    only chanel 1  
    sorry
    my problem is to know or go activate the chanel 2 in RX and TX
    73
    Janny 
  • Al K0VM
    Al K0VM Member ✭✭✭
    edited November 2017
    Janny,
       What DAX TX devices show up in the Windows Audio Device Manager ? Do They show up in your RTTY program ?
    image

    AL, K0VM
  • on5po
    on5po Member ✭✭
    edited January 2017
    image
    Al,
      I have 8 X DAX (only) reserved audio TX  
    how to make to have DX audio TX  
    it is my problem I am not very strong to compute of it, sorry,
    73
    Janny
  • Al K0VM
    Al K0VM Member ✭✭✭
    edited November 2017
    Janny,
      Does your DM780 Soundcard transmit selection look anything like this ?

    image

      Please attach a picture.

    AL, K0VM
  • on5po
    on5po Member ✭✭
    edited January 2017
    Al,  I have modify in DM780, as asked, to see capture   
    chanel 1 RX.. ok, chanel 2 no tx imageimageimage
  • on5po
    on5po Member ✭✭
    edited January 2017
    Al   I only have the TX with chanel 1 and DAX audio TX1(DAX TX Audio)  
    in DM780, Soundcard, with DAX Audio TX2(DAX TX Audio).... TX no 
    73
    Janny
  • Al K0VM
    Al K0VM Member ✭✭✭
    edited November 2017
    That looks okay..  Since you are showing signals in the Windows Audio Control panel for Reserved TX2, that means that signals are being presented to the radio.  See attached..image
    Note:: In lower right corner.. High cutoff must be above tone frequencies. 
    Note DAX button must be enabled in the P/CW panel.
    Note: During transmit,the level meter indicates signal.

    Your close..

    AL, K0VM


  • on5po
    on5po Member ✭✭
    edited January 2017
    Al,
     With tune--> OK --> indicate signal  
    Chanel 2 B in, with send or macro of dm780--> below TX lit no power,, DAX--> lights --> no indicate signal
    73
    Janny
    image
  • on5po
    on5po Member ✭✭
    edited January 2017
    Al,
      now it is OK, I had forgotten to light the chanel 2 and TX  in DAX control panel 
    you are  the best   
    thank you for your patience 
    the only problem, when I want to use with the TX A,  must change in soundcard dm780 to come back has DAX audio TX 1  for split........ I must work with DAX audio TX2  
    does have every time to change?????it is normal 
    73
    ON5PO, Janny
    image

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories