Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Output Power High on 12 Meters - 6300

Joe Bales
Joe Bales Member ✭✭
edited March 2017 in SmartSDR for Windows
New Flex 6300 user here and the rig is great.  Noticed last night when going from 20 meters CW to 12 meters CW the GUI was showing TX but the rig was not transmitting.  shutdown PC turned back on still same issue.  Went to 10 meters and 17 and the rig would do CW.  After stumbling with this it turns out that on 12 meters the rig is putting out in excess of 100 watts and with the power level all the way up the power meter is pegged to the right.  my Power meter is showing 140 watts in tune mode.   To get CW to actually transmit I have to bring down the power level to about 80 and CW is working again.  Anyone else seen this and it is only on 12 meters at this time.

Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    I have changed this post to a problem topic and converted this topic to a support HelpDesk ticket (http://helpdesk.flexradio.com) for expedited issue resolution.  If anyone else is experiencing an issue similar to this one, please submit a HelpDesk support ticket for issue resolution.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories