Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

is VNA capability going to be considered?

W5XZ - dan
W5XZ - dan Member ✭✭
edited June 2020 in New Ideas
it has been requested in the somewhat distant past; just wondering if it might appear on some roadmap, someday?

1
Up Down
1 votes

In Review · Last Updated

Comments

  • Jon_KF2E
    Jon_KF2E Member ✭✭✭
    edited June 2019
    Vector Network Analyzer? Is that what you are referring to? Maybe if you could explain what it is and why it would be useful, people would be better informed to vote it up.

    Jon...kf2e


  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    Here is the original post:

    https://community.flexradio.com/flexradio/topics/vector_network_analyzer_mode

    I would love to see this eventually, giving the ability to do antenna/coax analysis with just the rig.  It seems to me that the hardware is already there.  It just needs the appropriate software, if it is feasible.... perhaps in V. 3.0?

    Ken - NM9P



  • W5XZ - dan
    W5XZ - dan Member ✭✭
    edited December 2016
    Hi Jon

    yup, a VNA is so cool...you can measure inductors and capacitors at the frequency of interest, with remarkable accuracy...you have to learn about "S-parameters", but it's not THAT hard...you can measure feedline loss, electrical length in degrees ( and K, of course ), and characteristic impedance...you can sweep a band-pass, low-pass, or hi-pass filter...if you have one, you sell your MFJ-259...

    I'm surprised nobody else is 'liking this up' the list for FRS...

  • W5XZ - dan
    W5XZ - dan Member ✭✭
    edited December 2016
    and, of course, as Ken said, measure an antenna feedpoint impedance very accurately too...

  • W5XZ - dan
    W5XZ - dan Member ✭✭
    edited December 2016
    you can measure amplifier gain / vs freq across a wide range....and it's input Z and output Z...seems to me, all the hardware is in place...

  • pa0bie
    pa0bie Member
    edited August 2014

    If You wanted to use the FLEX as a measerment device like a VNA or SA then the first thing You needed are the possibility of markers as mentioned in an earlier comment. This can be simple lines in the panadaptor and a extra window with the values.

    Jan , pa0bie

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories