Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Band buttons for 136 and 477 KHz

pa0bie
pa0bie Member
edited June 2020 in New Ideas

Comments

  • pa0bie
    pa0bie Member
    edited March 2014

    It would then even be possible to assign on off the RCA connectors to this bands.

    Even with DDutil it is not possible at this moment.

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    What radio?  The FLEX-6000 has this capability via the transverter connector.  

  • pa0bie
    pa0bie Member
    edited March 2014


    Sorry Tim, i forget to tell that I have a 6700.

    It is important in combination with persistence and for DDutil.

  • pa0bie
    pa0bie Member
    edited March 2014

    It is also important in combination with band assignable TX1, TX2, TX3 and TX4 connectors.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited June 2020
    OK.  I fully understand the question now.  What you are asking for is specific band buttons for the 136 / 477k bands.  That feature is currently not on the list for a future enhancement.  I am going to change this to an "idea" post so others can comment on it.
  • pa0bie
    pa0bie Member
    edited March 2014


    Thanks Tim.

    We , pa0wmr and I , are working with band specific antennas and homebrew PA's for this bands. With the FLEX-5000 it was easier to work , because of the band assignable TX connectors and one more antenna connector for the other HF bands.

  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited December 2016
    It makes sense to me, eventually, to have band buttons for these two bands so that frequency, mode, filter, DAX, ANT, preamp, and AGC persistence would allow easier call-up for DIGI modes, etc on these underused amateur allocations.  Someday I hope to try them myself, but at least would like an easy way to listen without messing up other GEN frequencies.  
  • pa0bie
    pa0bie Member
    edited May 2014

    A little late response , but we are very happy with the 137 and 474 band buttons.

    I have made a 16 relais interface through DDutil and a LPT port for controlling external band specific equipment.  Works perfect.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.