Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

TCP client identification syntax "C1|client program surfacecontrol"

Richard G7EIX
Richard G7EIX Richard - EnglishmaninNCMember ✭✭
edited February 2017 in SmartSDR API

Is there a specific syntax for specifying a client name?

I have finally found the time to get deep down and dirty and start writing something using the TCP API Protocol and was just wanting to setup my program name - but alas....I get this no matter what I set it to.

C1|client program surfacepad
V1.1.0.0
H90879C4D
R1|10000002|unknown client program
M10000001|Client connected from IP 10.0.0.199

Yet if I emulate SmartSDR

C1|client program SmartSDR-Win
V1.1.0.0
H28F27383
R1|0|
M10000001|Client connected from IP 10.0.0.199

Is this for clients that are registered in the Firmware only?  if so, I will move on!


Answers

  • Steve-N5AC
    Steve-N5AC Community Manager admin
    edited February 2017
    A 0x1xxxxxxx message is styled as Informational.  A 0x5xxxxxxx is an error.  So this in an informational message to let you know that the firmware has no particular knowledge of your application and will not do anything to treat it any differently ;-)

    Steve
  • Richard G7EIX
    Richard G7EIX Richard - EnglishmaninNC Member ✭✭
    edited March 2015
    Thank you!

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.