Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

DDUtil's Amplifier drive level settings

W5UN_Dave
W5UN_Dave Member ✭✭
edited March 2017 in SmartSDR for Windows
Has anyone been successful in enabling the amplifier drive levels in DDUtil 3.04 and actually have them set the RF Power level in SSDR for the various bands? This does NOT work for me with my 6700, It DOES work with my PSDR 5000! Am I missing something here?

Answers

  • Al_NN4ZZ
    Al_NN4ZZ Member ✭✭✭
    edited March 2017
    Dave, I'm not using DDUtil to control my amp however I was using DDUtil to set the barefoot power levels. Prior to 1.0.24 DDUtil would set the barefoot drive levels to the values in the snapshot below. For example 80M was set to 61 watts for barefoot which I also use for driving my amp. After the beta was installed the values in DDUtil don't seem to have any effect. However the power levels are now persisted in SSDR. So it's not an issue for me. The new persistence may be why you can't control the power from DDUtil. Just a guess.....someone from FRS could correct or confirm. Regards, Al / NN4ZZ

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.