Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Looking for USB Soundcard

Member ✭✭
edited April 2019 in SmartSDR for Windows
Does FRS have a recommendation for a decent USB sound card that will work for direct audio connection between the F6000 radios and digital applications?

Welcome!

It looks like you're new here. Sign in or register to get started.

Answers

  • Member ✭✭✭
    edited February 2019
    SignaLink USB works great here. Supplied cables go right into mic and phones jacks, and you're on the way. 73 George/KF2T
  • Administrator, FlexRadio Employee admin
    edited March 2017
    Steve, Please clarify what you mean by "direct connect". Any sound card is usable, you just need an analog interface between the radio's analog IO ports and the PC sound card, preferably isolated to prevent ground loops and RFI ingress. You can not connect a sound card to the USB port on the radio (of for that matter any device to the radio's USB port.
  • Member ✭✭
    edited April 2019
    I was referring to a physical connection rather than a software (VAC) connection. Something similar to the Signal Link George mentioned.
  • Administrator, FlexRadio Employee admin
    edited March 2017
    Thanks for the clarification, Steve. You can cobble together an analog interface through the ACC port too.
This discussion has been closed.