Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

2 radios, same network, different PC's

Tom C
Tom C Member ✭✭
in SmartSDR for Windows

I just noticed this behavior and can't figure it out, may be something I have done.

I have a 6600 and an 8600 on my network with a PC for each. The 8600 is using transverter 1 on 630 meters and has TX1 as the push to talk. The 6600 is on transverter 1 on 144 MHz also using its TX1as ptt1. The 8600 is using CAT COM 4, the 6600 is using CAT COM 7 (they were the same but I changed them to see ). When I key the 8600 from Smart SDR, both radios key up the transverters. However, when keying the 6600 from SDR on the other PC, it is the only radio activated. Of course, turning TX off on the 6600 fixes the problem but changing the com port didn't.
I hope I explained this well enough.
Thanks for any ideas.

Tom

N9RU

Best Answer

  • Tom C
    Tom C Member ✭✭
    Answer ✓

    OK, sorry for the bandwidth, after restarting SmartSDR on both PC's the problem went away.
    Strange things can happen.

    Tom

    N9RU

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories