Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Master Volume Control Delay ?

Richard G7EIX
Richard G7EIX Member ✭✭
edited June 2020 in SmartSDR for Windows
This is with V1.0 and a 6500. Adjusting the master volume slider works, but it takes a time to take affect - its as if it adjusts the volume slowly on release of the slider.
Tagged:

Comments

  • Richard G7EIX
    Richard G7EIX Member ✭✭
    edited June 2020
    Ok, I just did a complete power cycle of the radio and restarted the PC - the delay is in no way as bad as it was (2-3 seconds to adjust) but there is a delay when adjusting still (around 200ms would be a rough guess).
  • Richard G7EIX
    Richard G7EIX Member ✭✭
    edited March 2015
    And this PC is connected to a GB switch - the same switch as the radio.
  • Dave-N9CHM
    Dave-N9CHM Member ✭✭
    edited December 2016
    I also had a delay yesterday on initial setup. On power up today, also see that there still is a small delay on volume control, though not as bad as initially.
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited December 2016
    It seemed as though the delay on my 6500 was worse when I had the Display FPS turned up higher. I usually run about 8-11 FPS. I need to test this again when I return to the shack. BTW, the delay was on BOTH the master volume and headphone controls. I totally powered it down last night, and will test it from a cold start again this evening.
  • Richard G7EIX
    Richard G7EIX Member ✭✭
    edited March 2015
    I just tried with the headphones and the same delay is apparent. Nothing that I cannot live with but a definite delay when adjusting up and down. More easily noticeable if you rapidly move the slider back an forth several times rapidly. It's also the same with FPS down to a low level too.
  • Eric-KE5DTO
    Eric-KE5DTO Administrator, FlexRadio Employee admin
    edited February 2017
    Thanks for reporting this. We have added this to our Bug Tracker for further examination.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    This defect will be fixed in SmartSDR v1.1

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.