Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.

Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

---

The latest 4O3A Genius Product Software and Firmware

If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Mike KE4U

• Activity
• Posts8
• Comments21

• How to Auto-Run the 6400M Upon Start-up

  Mike KE4U

  February 2018
  Is there a way to auto-select and run a SMartSDR version from the start-up splash screen without user interaction? Thanks, Mike, KE4U
  1

• Field Modification - ADC Heat Sink Replacement

  Mike KE4U

  June 2018
  PEN - Field Replaceable Heat Sink Kit received and installed. The instructions were clear and the procedure detailed. Thanks for the opportunity to do the replacement in the field and no downtime shi…
  1

• Re: 6400M - Add hysteresis to MIC and VFO Rotation

  Mike KE4U

  March 2018
  Related - Also consider changing from linear encoder handling to a ballistic encoder handler. Slow rotation makes fine adjustments and faster rotation makes coarser adjustments.
  1

• Re: Flex 6400M noise floor

  Mike KE4U

  April 2018
  S-meters indicate Received Signal Strength per IARU standards. My Flex 6400M running on shack emergency battery power with a shorted antenna input and -8dB of RF gain on 75M with NO back panel connec…
  1

• Re: Brand new to 6400m problems finding transmitter settings

  Mike KE4U

  July 2018
  Hi Pepper - There are several transmitter settings areas you can access. 1. Holding down the MIC / SPEED knob or touching the RF PWR information center-screen will bring up a menu. 2. The Transmit ta…
  1

Next