Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Mal G3PDH ✭✭

  • Re: CW RF power Drop Outs

    As a further comment I can confirm that having successfully installed the latest version 3.5.8 that the CW RF drop out problem is still there and just as annoying. No formal response seen from Flex s…
  • CW RF power Drop Outs

    It is disappointing to have to raise this subject yet again after nearly 5 years during which we CW operators have continued to experience the dropping out of RF power whist transmitting. For anyone …
  • Re: CW RF Drop Out

    Hi Martin Thanks for your input. I have never really used VOX in anger on the Flex so unable to confirm about experiencing that. However I had noted that intermittent VOX reports had been made and th…
  • Re: CW RF Drop Out

    Further to this thread I have carried out test this morning using about 15w into a dummy load and proven that the RF drop out still exists in v3.4.21 software. It is very infrequent and took some tim…
  • Re: CW RF Drop Out

    Hi Mike, I note your comments but all 3 CW operators in my local area here have the same problem and I know of others in Europe who also reported the same previously. It has nothing to do with RFI an…