Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: DXLab Does Not Support SmartSDR v 3
I've used DXLab Suite for several years and would not be willing to sacrifice it for the advertised benefits of SmartSDR V3. I hope that the folks at DXLab and Flex will step back and reset thei…1 -
Re: Remotely control a KPA500?
Zach,Use the top RS-232 (PC) DB9 serial port with a standard serial cable. I also control a SteppIR SDA100 and Green Heron RT-21 via the serial interfaces. When operating on my LAN I normally use DDU…1 -
Re: WSJT-X Advantages of Setting up multiple instances each with unique panadapters and Slice?
Hi Jerry,I was a little bored recently and launched two synchronized instances of WSJT-X in FT8 mode on my Flex 6600 to compare two antennas. One SCU was connected to a SteppIR elevated vertical (Sli…1 -
Poor PSK31 decoding with FLdigi
I am puzzled by poor decoding of PSK31 signals with FLdigi and DXLabs Winwarbler on my Flex 6500. Generally, any signal less than -85 dBm is mostly gibberish with either digital application. Only ver…1 -
Re: KPA-500 on QSK
Some operators may want fuller control of the KPA500, including power on/off, OPER/STBY with PA temp, fan speed, current and voltage monitoring. DDUtil handles it all nicely. The Flex USB/serial cabl…1
