Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: HIgh End Flex Users Disappointed by APD limited to 8600 Hardware
A personal observation of what APD can do…. I have a very experienced local ham friend that has a lot of experience with both Flex (6700 and 6600) and the ANAN. I can tell immediately which radio he …4 -
Re: 6600M Chimes on TX
One final comment... I have a seven element yagi on a temporary short tower (25') that is located only about 30 feet from the shack. I forgot about seeing this same issue whenever the antenna is…1 -
Re: Popping on All Flex radios.
Thanks Bret, Well, not using Smartlink so I don't think that is causing the popping. No changes made to the computer (W10 Pro) except putting 2.10.0 on. I found a link to a MS site describing ho…1 -
Re: Popping on All Flex radios.
I have been noticing this popping as well. It has become very noticeable after upgrading to 2.10.0. Same symptoms as reported by the OP in this tread. Rebooting everything does not help. Other statio…1 -
Re: Radio powers down when transmitting
Hi Clint. Hope you got your problem resolved. I'll pass along an experience that I had with my 6600 a couple of years ago. I was having the same problem. If I set the radio to 100 watts and sent…1
