Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.

Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

---

The latest 4O3A Genius Product Software and Firmware

If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

K0FLY · Gayle-K0FLY · ✭✭✭

Hi Glen: I use a foot switch plugged into the PTT Jack (RCA) on the rear of the radio. Gayle K0FLY

• Activity
• Posts1
• Comments287

• Re: Connector Needed For Heil PR781

  K0FLY

  September 2025
  The 781 mic has an XLR connector. The 6400 uses an 1/8 inch (3.5mm) TRS jack for the mic input. Good ole Amazon has multiple XLR to 1/8 inch mic cables in various lengths. They are priced in the 10 t…
  1

• Re: Reversed power polarity to flex 6300 and it now does not turn on.

  K0FLY

  December 2024
  The fuse is inside the radio, it's automotive type. You will need a Number 9 Torx bit to take the cover off. Gayle K0FLY
  1

• Re: waterfall is "Crazy" And i cant see other station

  K0FLY

  September 2024
  Your display gain may have gotten set to high value. On the left hand side of the pan adapter click on "Display", move the gain slider to the left. See if this helps also make sure that the…
  2

• Re: Switch to use with Maestro

  K0FLY

  September 2023
  I use a inexpensive unmanaged Linksys (CISCO) 8 port switch. two radios, Maestro, PC, PGXL and a HP 9010 Office Jet printer. Gayle K0FLY
  1

• Re: Where can I buy a 10' mic cable?

  K0FLY

  September 2023
  If you already have a short working mic cable with XLR to 3.5 mm trs plug, you might want to look at audio extension cable that has a 3.5 mm jack to 3.5 mm plug. They come in many lengths from 5 to 2…
  1

Next