Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: 6600M bandwidth center/width controls
In SSB mode. I haven't tested it in CW mode yet. When I said outer I meant the one sticking further out from the front panel. You are right it is the inner, concentric, knob that changes the mod…1 -
Re: 6600M bandwidth center/width controls
Rich, sometimes it is more convenient to set a receive bandwidth for SSB and then be able to slide this bandwidth window slightly up or down in frequency to eliminate QRM from above or below this fre…1 -
Re: Why does the Flex 6600 need band preselectors?
Those analog preselector filters are there to protect the A/D converters from strong out of band signals, but the insertion loss of the 7th order filters is about 8dB which degrades the noise figure …1 -
Re: Why I chose Power Genius XL & First Impressions
The next step will be to put adaptive pre-correction around the FlexRadio and amplifier combination to drive the IMD levels below 50dB. This is a feature that the Flex engineers should move up in pri…1 -
Re: Why I chose Power Genius XL & First Impressions
50db is 10dB less adjacent channel QRM than 40dB and well worth striving for. It really doesn't matter if the exciter/transceiver has very low IMD distortion in its output stage. The IMD will be…1
