Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.

Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

---

The latest 4O3A Genius Product Software and Firmware

If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Doug Hall ✭✭

• Activity
• Posts18
• Comments225

• Re: Remote Operations - Lightning Rig Saver

  Doug Hall

  November 2020
  Dave, I printed the enclosures this weekend. No issues printing on a cheap-o Ender 3 printer using PLA. After a bit of light sanding and cleaning the inner section slides in and out very nicely. Now …
  2

• Re: External Audio DSP usage

  Doug Hall

  October 2020
  Robert, I have some experience with the NIR-12 as I designed the hardware and wrote the software for it back in the 1990s. The bandpass filtering on the NIR-12, while quite good, will have a disadvan…
  1

• Re: Remote Operations - Lightning Rig Saver

  Doug Hall

  October 2020
  Dave, This is outstanding, and something I have wanted to build for quite some time. Thanks for the design and for your willingness to share it. 73, Doug K4DSP
  1

• Re: tweaking latency in digital modes ?

  Doug Hall

  March 2018
  You can try reducing the RX filter latency. In SSDR go to Settings->Radio Setup->Filters and select Low Latency for the mode in question. I'm a little confused - you said you were using a …
  1

• Flex-6000 with KPA-500 FYI

  Doug Hall

  December 2018
  From time to time people ask about QSK and amplifiers on the Flex, and about suitable values for TX Delay in the radio setup. Tonight I had the 'scope hooked up and looked at the key line on my …
  1

Next