Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.

Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

---

The latest 4O3A Genius Product Software and Firmware

If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Craig_KØCF ✭✭✭

• Activity
• Posts2
• Comments438

• Re: FRStack Are there REST string value codes for Processor ON, OFF, NOR, DX and DX+ ???

  Craig_KØCF

  May 2020
  Great, Clay! The Stream Deck is marvelous, especially now that they have added multi-functions and toggles to the keys. I have the XL, 32-key version and have filled several full pages with Flex and …
  1

• Re: Maximum of 2 slices amongst both stations using multiflex v3.1.12

  Craig_KØCF

  May 2020
  The 6300 only supports two slices. Period. So if running multiflex, each client can have only 1 slice. See this page: https://www.flexradio.com/?s=Flex+6300
  1

• Re: HRD no audio in CW TX mode

  Craig_KØCF

  May 2020
  CW is not an audio transmit mode. It is generated by turning the transmitter, which is generating a pure un-modulated carrier, on and off, commonly called "keying". In the Flex 6500 this is…
  1

• Re: Band select buttons in SmartSDR

  Craig_KØCF

  May 2020
  I see you are using MRU Bands. I use the Memories because they are much more versatile. You can name them (as I have done), set a frequency and mode, selectivity, antenna, RIT/XIT, etc. To access thi…
  1

• Re: Keying Expert 1.5K-FA amp

  Craig_KØCF

  June 2020
  OK, now try plugging the RCA cable back into the amp and unplug it from the Flex. Using a screwdriver, short between the center pin and sleeve of the RCA plug at this end of the cable. Does it key th…
  1

Next