Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.

Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

---

The latest 4O3A Genius Product Software and Firmware

If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Craig_KØCF ✭✭✭

• Activity
• Posts2
• Comments438

• Re: Update from v2.4.9 to v2.6xxx. What do I believe.

  Craig_KØCF

  September 2019
  There should be no confusion: the v2.6 Release notes are listed in the Downloads section right below the Installer:
  2

• Re: CW Skimmer

  Craig_KØCF

  October 2019
  The signals in the passband of Skimmer are NOT CW signals. They appear to be FT8. Tune the radio so that CW signals appear in the Skimmer window and it will likely work.
  2

• Re: Do I really need 500 kbs to make a 6000 series radio work?

  Craig_KØCF

  December 2019
  To use your computer for audio, there is a button labeled "PC Audio" in the SmartSDR title bar, near the right end. Click this and SmartSDR will send its audio to the PC's default audi…
  2

• Re: 4K DIGU Slice but TX Suppressed above 2.6K??

  Craig_KØCF

  December 2019
  You have your transmit bandwidth set too narrow. It is on the Transmit Control panel, a pair of text boxes with up/down arrows at either end. Set the "High Cut" to 4kHz.
  1

• Re: Broadcast station on 40m spilling into 40m Ham Band

  Craig_KØCF

  January 2020
  Won't help. His interfering station is a 40 meter Shortwave broadcast station, probably just above the top of the 40 meter ham band. These filters are for the 500 kHz to 1.7 MHz AM broadcast ban…
  2

Next