Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: Noise reduction
Which band 160M? Turn on WNB Turn on NB Reduce the AGCT value, engage the filters. It's not about how loud a signal is, but how much it sticks out of the noise. Use a separate receive antenna (l…1 -
Re: Receive Latency
Exactly. The remote Audio on the Flex should be as low latency as on a RemoteRig connection, which it is not. The decoding is already done, so the remote audio should only add a few MS to the whole s…1 -
Re: Flex-6500, SmartSDRv2.0.19 communicating via USB to my computer?
Not necessary. You can connect to a virtual com port that is provided by the SmartSDR CAT program. SmartSDR CAT uses TCP/IP to talk to the radio and then provides you with Virtual Serial Ports. You c…1 -
Re: Can audacity send audio to my flex for direct broadcast?
Or you can setup N1MM+ with your CQ call and do everything from the logger. 73, Andreas, N6NU1 -
Re: Change side tone volume
Push the Mic/Speed/PWR button on the Maestro. A menu will pop up and there you can set the Sidetone settings.Andreas, N6NU1
