Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.

Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

---

The latest 4O3A Genius Product Software and Firmware

If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

W9WLX_Chuck ✭✭

• Activity
• Posts20
• Comments88

• Re: Spectral Abnormality in FT8 Mode Transmission

  W9WLX_Chuck

  May 2018
  Also--it is easier to prevent overdriving your audio chain if you run your RF power at 100%. I generally run RF power at 100% and throttle back my final output power by reducing the audio level.
  2

• Re: Mastro cant connect to Cell Phone WiFi

  W9WLX_Chuck

  February 2018
  Mike, check your device's name. It usually becomes the WIFI network ID. I had the same problem and there was an apostrophe in my device name which prevented connection. I believe Apple uses an a…
  2

• Re: Undervoltage/powerpole issue

  W9WLX_Chuck

  December 2019
  The physical limitation is the limited area of the connector. One way to address would be a second set of PP connectors on the Flex in parallel. Then we could easily run parallel #10 cables from the …
  1

• Re: D-Star Transmit Issue

  W9WLX_Chuck

  February 2018
  When in D-Star mode, make sure your low cutoff on the transmit bandwidth is set to 0. The first 100 Hz is where the data stream is for your call. Chuck, W9WLX
  1

• Re: IC-7600 and PGXL

  W9WLX_Chuck

  May 2019
  Tip and ring on the TRS side goes to tip on mono side, shield to shield.
  1

Previous Next