Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

K0FLY · Gayle-K0FLY · ✭✭✭

Hi Glen: I use a foot switch plugged into the PTT Jack (RCA) on the rear of the radio. Gayle K0FLY

  • Re: Setup guide for TX & RX only antenna on same band - 6600 + AG8x2

    K0FLYK0FLY
    Connect you RX only antenna too either of the RX BNC connectors located on the rear panel. The receive antenna input is selected On the slice Flag (blue antenna color is receive). Left click on the b…

  • Re: 6600M Ant RF Gain vs 6500

    K0FLYK0FLY
    The 6600 has sharper front end band pass filters which have more loss than those in the 6500. Sherwood noted this during his measurements. From Sherwood's Test Notes ----------------------------…

  • Re: Chasing RFI

    K0FLYK0FLY
    Neil: Great questions, especially number 2 and 3. The common mode choke on the Vertical is very important. You might also ask what power level the interference starts to occur and if any one cable to…

  • Re: Maestro Physical Dimensions?

    K0FLYK0FLY
    From the Maestro spec sheet on the flex site. The 1.75 inch depth appears to not include the knobs. The depth including knobs is about 3 inches. Gayle K0FLY Mechanical Without Feet: Height: 6.75″ (17…

  • Re: Using an external keyer with the 6400M

    K0FLYK0FLY
    Yes tip and sleeve. ______________________________________from Flex Hardware manual________________________________________ 7.4 CW KEY/PADDLE JACK For CW operation, the ⅛ inch (3.5mm) TRS KEY connect…
Avatar