Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: Tuner Bypass SO2R
Correct. When in bypass the C1, C2 and L will show zero. Dave wo2x1 -
Re: Interfacing a PGXL/TGXL/AG8x2 with ANAN G2
Hi Clif 1) it doesn’t hurt but adds slight delay. Normally we want to see TX Delay set to 30 ms on the transceiver. 2) Yes radio -> TG PTT In -> TG PTT Out -> PG PTT In 3) you will need to u…1 -
Re: PGXL in Multi-Two setup
It is first one “gets the ball”. Plus you would need to use the TX Req line out of Flex to tell other radio when it is transmitting (if other radio supports it). Or use third party hardware to use Fl…1 -
Re: New Software for TGXL
If you have am AG then TG XL 1.2.11 and AG 4.1.7 need to be used together. Or stay on AG 3.1.5 and TG XL 1.1.20. Don't mix them. Oh, and new TG firmware WILL wipe out your config. Write down you…1 -
Re: PGXL in Multi-Two setup
Only one transmitting at a time. When the A side of the PG XL is transmitting, the B side is bypassed straight through. You can receive on one while transmitting on the other. 73 Dave wo2x2
