Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: ALC 6400
If you are not using an amp that provides ALC feedback to the radio then you will not see ALC indication. As Len indicated, set TX audio peak level for SSB to not exceed -5. It should never go into t…1 -
Re: Why does my logger follow last turned freq dial instead of active transmitter?
Here's right from the author's web site - "Flex Radio (via API)Rig Name = Flex APINote, no other settings are required with the Flex API option. With this option, my software will trac…1 -
Re: I have a Expert 1.3K-FA Amp and and a Flex 6400. What could be the problem with my audio distorting
Ok, with the amp straight into the dummy load and listening where? How are you monitoring your signal? Different radio or monitor on Flex? If on a different receiver and only with the SPE amp then th…1 -
Re: Connecting a 6400 and Yaesu FTdx101D to PGXL, Palstar HF Auto, and Antenna Genius
The amp and antenna switch has separate paths for the A and B side. The tuner can only work with one RF path. Question is what band or bands need the tuner? if you only need the tuner on one antenna …2 -
Re: Flex 6700 Shutting down and Error Messages.
Have you checked to see if you have a voltage drop during TX? You can install FRStack which can show the voltage at the PA and then set tune to 100 watts and engage tune. Watch internal voltage on FR…1
